Home>Products
.jpg)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
WB-PP-5248 Type FTP Cat6A Patch Panel
Description:
A patch panel is a device or unit featuring a number of jacks,usually of the same or similar type,for the use of connecting and routing circuits for monitoring, interconnecting, and testing circuits in a convenient, flexible manner. Patch panels are commonly used in computer networking, recording studios, radio and television.
A patch panel is a block of jacks,the number of which corresponds to that of ports. E.g., a block of 24 jacks is a 24-port panel.When building structured cabling systems, patch panels are used in racks and telecommunication cabinets for cable mounting in order to provide a high-quality commutation.
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".
A patch panel is a device or unit featuring a number of jacks,usually of the same or similar type,for the use of connecting and routing circuits for monitoring, interconnecting, and testing circuits in a convenient, flexible manner. Patch panels are commonly used in computer networking, recording studios, radio and television.
A patch panel is a block of jacks,the number of which corresponds to that of ports. E.g., a block of 24 jacks is a 24-port panel.When building structured cabling systems, patch panels are used in racks and telecommunication cabinets for cable mounting in order to provide a high-quality commutation.
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".
Key Feature:
48 ports patch panel, CAT6A FTP type. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.
The outstanding shielding effect. The cable management and grounding device are combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel. The shielding foil of the cables and the grounding device of the patch panel can be connected availably
According to the standard of ISO/IEC 11801: 2002 CLASS D and ANSI/TIA/EIA/568B Cat. 5e standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting.
Connecting: FCC port for CAT6A FTP patch cord and IDC for horizontal distribution cables.
Compatibility: Compatible for CAT6A FTP general cable distribution systems.
Technique Characteristics:
Entire high-carbon steel outer frame, with plastic powder cladding.
STP RJ45 jack frame material: PBT, golden plated phosphor bronze pins, Shielding shell of the STP RJ45 jack: Brass housing with nicket-plated; IDC clip: Tinned phosphor bronze pins.
Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times. FCC ports inserting duration: 750 times.
Cabling sequence: T568A & B.
Punching tool: Standard LSA tool.
Testing condition of transmitting capability: 100MHz
Body color:RAL9004(black);RAL7035(grey) or other colors for options
48 ports patch panel, CAT6A FTP type. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.
The outstanding shielding effect. The cable management and grounding device are combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel. The shielding foil of the cables and the grounding device of the patch panel can be connected availably
According to the standard of ISO/IEC 11801: 2002 CLASS D and ANSI/TIA/EIA/568B Cat. 5e standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting.
Connecting: FCC port for CAT6A FTP patch cord and IDC for horizontal distribution cables.
Compatibility: Compatible for CAT6A FTP general cable distribution systems.
Technique Characteristics:
Entire high-carbon steel outer frame, with plastic powder cladding.
STP RJ45 jack frame material: PBT, golden plated phosphor bronze pins, Shielding shell of the STP RJ45 jack: Brass housing with nicket-plated; IDC clip: Tinned phosphor bronze pins.
Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times. FCC ports inserting duration: 750 times.
Cabling sequence: T568A & B.
Punching tool: Standard LSA tool.
Testing condition of transmitting capability: 100MHz
Body color:RAL9004(black);RAL7035(grey) or other colors for options
