Home>Products
WB-LC-42P3 Cat6 FTP Network Cable
PVC Jacket
Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.
Solid Cable Design
Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.
Pull-Through Design
Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.
DESCRIPTION
This FTP (foiled twisted pair) cable is perfect for any indoor networking application in a noisy environment. This rating of cable contains a shielding designed to resist crosstalk and electromagnetic interference that comes with networking in close proximity to other cable sources.
Category 6
The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable
is preferred for more advanced networking installations where a higher bandwidth than normal is required.
PVC Jacket
Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.
FTP (foiled twisted pair)
This type of cable comes complete with a Foil Shielding, to protect the signal strength of the cable and ensure that there is no signal loss due to nearby electrical equipment,
or cross-talk from additional cables in close proximity.
23 AWG
For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable
installation. American Wire Guage (AWG) is the standardized gauging system for measuring wire sizes.
Solid Cable Design
Designed for more straight-forward, simple installation, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and
twists in the line.
Specs
Conductor Bare Copper
23AWG (0.575mm)
Thickness (mm) 0.20 + 0.02
Outer Diameter (mm) 7.8
Jacket HD-PE
ShieldingAL/Pet Tape (mm) 25 + 0.5
Overlapping Rate (%) 33.3
Drain Wire (mm) 0.167
Standards
UL Listed
RoHS Certified
CSA Style FT4
Applications
High-Speed Horizontal Cabling
100 Mbps TPDDI
1000 Base-T
622 Mbps ATM
IEEE802.3/IEEE802.5
