Home>Products

WB-PP-4024 135 Degree FTP Cat6 Patch Panel

Description:
A patch panel is a device or unit featuring a number of jacks,usually of the same or similar type,for the use of connecting and routing circuits for monitoring, interconnecting, and testing circuits in a convenient, flexible manner. Patch panels are commonly used in computer networking, recording studios, radio and television.
A patch panel is a block of jacks,the number of which corresponds to that of ports. E.g., a block of 24 jacks is a 24-port panel.When building structured cabling systems, patch panels are used in racks and telecommunication cabinets for cable mounting in order to provide a high-quality commutation.
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".

1 × free sample is even available

Specifications

Products Describe:

19" standard size for mounting into server racks and network cabinets

This patch panel is designed for 22-26 AWG solid conductors

1U Height (24 ports) with screws covered

Horizontal termination, free tool jacks

Stainless steel mounting ear

135degree shielded CAT6 panel

Back metal wiring organiser, and Y/G earthing cable

Material :

Housing: ABS 94V-0

IDC: PC UL94V-0

PCB: FR-4 1.60 mm (0.06") thick, 2 layers .

Contacts: 0.35 mm (0.014") phosphor bronze with 1.27 micron (50 microinches) gold plating on contact area

Metal housing: 1.50 mm thick metal.

Construction characteristics:

Color marking of conductors according to T568B and T568A

Numeral marking of ports on the front side of the panel

Space for additional marking

Color and numeral marking of IDC modules on the rear side of the panel

IDC Dual contacts provide minimal crosstalk

110 type punch down tool is used for cable termination

Electrical characteristics :

According to UL 1863

Current rating: 1.5 A max

Voltage rating: 150 V

Contact Resistance: 20 mOhm

Insulation Resistance: 500 MOhm

Dielectric withstand voltage: 1000 V AC RMS, 60Hz/1min

Operation Temperature: -40 ~+70 degree centigrade